Recommended news

The traditional fan must be placed close to the power supply and socket

Posted by : admin / On : 2020-09-19 15:18:08 / In : visits: 2166

            Introduction: the traditional fan must be placed close to the power supply and socket, which has great limitations. This kind of fan is much bigger than the previous small fan which uses battery as energy, and it is also very safe. So how does the charging fan charge? How can we use it correctly? below...

            The traditional fan must be placed close to the power supply and socket, which has great limitations. This kind of fan is much bigger than the previous small fan which uses battery as energy, and it is also very safe. So how does the charging fan charge? How can we use it correctly? Below I recommend a few good charging fan brands for your reference, but also teach you how to charge the charging fan, hope to help you.

             Is charging fan easy to use

             Because the charging fan depends on the battery, it is better to use the battery in the process of use, just as we use mobile phones. If the battery is not good, the power storage function will be affected. So the cell phone is not good. The same is true for charging fans. So how can we do a good battery? First of all, the first charge must be at least 12 hours, and then each charge should be within 8-12 hours. After each use, when the electricity is about to run out, it should be connected to AC charging. In any case, the battery should be kept charged, otherwise it will cause damage to the battery. Even if you do not use it, you need to charge it every three months.

             How to charge the fan

             Charging fan is usually composed of shell, battery, electric control board, DC motor, lamp tube and flat wire. When we connect the fan power cord to the 200V power supply, the charging power will start to work, and the built-in rechargeable battery can replenish the power. When the charge lamp changes from red to green, it means that the battery is fully charged. Normally, a full charge takes 6-8 hours. After charging, the fan can use the power in the battery to work. Although the use of a fan while charging does not affect its performance, generally speaking, not using a fan during the charging process can make the power fill up more quickly. After a full charge, the fan can work for up to 20 hours under normal conditions. Charging fan usually has a strong adaptability to voltage, 110 ~ 250V voltage can be used.

            How to maintain the charging fan

            Clean the fan with a soft cloth before cleaning the fan.

            Do not wash the fan directly with water, nor use chemicals, alcohol, or detergent to remove dirt. These substances may cause deformation or discoloration of the charging fan appearance.

            In the process of using the charging fan, if there are abnormal phenomena such as hot hand, abnormal burnt smell, unsmooth shaking head, slow rotation speed of bearing heater, the power supply should be cut off immediately and relevant personnel should be contacted for maintenance

            When the fan is just started, it is better to set it to the fast gear first, and then turn the wind speed back to the slow gear after the speed is normal. This can save power and prolong the service life of the fan.

            In cold season, clean the fan before putting it away. Wipe the oil and dust on the surface with soft cloth, then wrap the fan with kraft paper or clean cloth, and then pack the fan in a dry and ventilated place.


Reminder